Pimoroni NVMe Base Plate

Pimoroni NVMe Base for Raspberry Pi 5 (No SSD)

Raspberry Pi M.2 HAT+


100% MONEY


Availability: Out of stock

The Raspberry Pi M.2 HAT+ enables you to connect M.2 peripherals such as NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface, supporting fast (up to 500 MB/s) data transfer to and from NVMe drives and other PCIe accessories.

Raspberry Pi 5’s single-lane PCI Express 2.0 interface is exposed on a 16-pin, 0.5mm pitchFPC connector; the M.2 HAT+ M Key is a mechanical adapter board that converts between this connector and a subset of the M.2 standard. It supports devices that have the M.2 M key edge connector, in the 2230 and 2242 form factors. It is capable of supplying up to 3A to connected M.2 devices.

The Raspberry Pi M.2 HAT+ conforms to the Raspberry Pi HAT+ specification and is autodetected by the latest Raspberry Pi software/firmware. It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place. 



  • Supports single-lane PCIe 2.0 interface (500 MB/s peak transfer rate)
  • Supports devices that use the M.2 M key edge connector
  • Supports devices with the 2230 or 2242 form factor
  • Capable of supplying up to 3A to connected M.2 devices
  • Includes power and activity LEDs
  • Conforms to the Raspberry Pi HAT+ specification
  • Supplied with ribbon cable, 16mm stacking header, threaded spacers and screws, and knurled double-flanged screw to secure and support the M.2 peripheral

Operating temperature: 

0℃ to 50℃ (ambient)

Production lifetime: 

The Raspberry Pi M.2 HAT+ will remain in production until at

least January 2032


For a full list of local and regional product approvals, please

visit pip.raspberrypi.com


More Information
Compatible with Raspberry Pi 5
Write Your Own Review
You're reviewing:Raspberry Pi M.2 HAT+